Paving Panels
How do you uniquely let natural light in?
By installing a glass block floor or ceiling
The patented Ezylay Paving System lets you create a spectacular design allowing natural light into unavoidable dark areas. With the Ezylay Glass Block Paving System you can install glass blocks in floors and ceilings that not only have an unrivalled visual impact but is also uniquely trafficable and fire rated if required.
- Glass Block Pavers installed with the Ezylay Paving System -
Produce a trafficable area that is not only structural, but lets natural light filter through to the floor below whilst providing sound and thermal insulation, there is no alternative. - Conform to Australian Standard Fire Rating Levels (FRL) for Structural Adequacy/Integrity/Insulation, without compromising light and style, you can achieve FRL 60/60/30, FRL 60/60/60 and FRL 120/120/90 with the appropriate glass block pavers and the Ezylay Insulating Paving concrete.
- All GBTI distributors are able to confidently issue conformity Certificates.
have adequate strength and a smooth finish to the underside of the panels with no unsightly water, air or worm holes, then you can achieve this with the specifically developed premixed Ezylay Paving Concrete and Ezylay Insulating paving Concrete. - Have the top of the panels to have non-slip joints and a beautiful finish, the unique Ezylay Topping Mix can provide this.
Can be large panels that have uniformity and accessibility, constructed in one piece on site. - Can be small panels constructed in our warehouse - prefabricated - and delivered to site. Smaller panels can be joined together to make a larger panel.
- Are affordable that do not sacrifice style or quality. Costs are reduced significantly as materials have been developed specifically for installing glass block paving.
|
Standard |
Fire Rated |
|
Maximum Dimensions Per Panel |
|
|
May be larger than fire rated panels but depends on the load capacity required. Some panels will withstand loads of up to 10 tonnes per metre square. These panels have to be individually engineered or have the approval of GBTI. |
|
|
Maximum Dimensions Per Project |
|
|
Unlimited. Multiples of the above panel sizes may be constructed and laid side by side to form a large area. Expansion Foam and Construction Sealant must be placed between each panel and around the perimeter for expansion. |
Unlimited. Multiples of the above panel sizes may be constructed and laid side by side to form a large area. IBS Foam and fire mastic must be placed between each panel and around the perimeter for expansion. |
|
Load Bearing Points |
|
|
Along the shortest distance of the panel. Panels are not required to be supported on each of the longer sides. Panels that are supported on all four sides will increase the load capacity of the panel. |
Along the shortest distance of the panel. Panels are not required to be supported on each of the longer sides. Panels that are supported on all four sides will not increase the fire rating or the design load rating when issuing the Conformity Certificate |
| Block | Load Capacity | FRL |
| BG1930F | 5 kN/m² | 60/60/30 |
| BG1960F | 7.5 kN/m² | 60/60/60 |
| BG1990F | 7.5 kN/m² | 120/120/90 |
View Glass Block Pavers Selection, or View our Gallery of Paving Photos.
